Use Of A Bedpan Or Bucket - lopital Flexo 5100 Mode D'emploi

• The Flexo can now be moved backwards over the toilet.
• Lower the Flexo, if necessary, to achieve the right position.
The Flexo does not fit over every toilet.

3.5.2. Use of a bedpan or bucket

• If the Flexo is being used as a toilet chair, the special
guides under the seat can be used to accommodate a
stainless steel / plastic bedpan or bucket.
• The bedpan or bucket is slid in from the back of the chair
(See figure 16).
• If you are using the Lopital plastic bedpan, you must slide
it as far forwards as possible (See figure 17).
• If you are using a stainless steel bedpan or bucket, the
bedpan can be placed in 2 positions under the seat. At the
front of the seat (See figure 18) or at the back of the seat
(See figure 19).
In order to avoid injuries, we advise the carer to remove
the seat inlay from the seat and insert the bucket or
bedpan before the client takes a seat on the chair.
The Lopital plastic bedpan, stainless steel bedpan and
bucket must be cleaned and disinfected after use, for
example in a bedpan washing unit.
If the Lopital plastic bedpan, stainless steel bedpan
or bucket has been used, it must be removed from the
chair before the chair is moved or adjusted in height.
Flexo Shower-toilet chair | Instructions for use | 29
Figure 16 Bedpan.
Figure 17 Lopital plastic bedpan.
Figure 18 Stainless steel
bedpan, front.
Figure 19 Stainless steel
bedpan, back.