lopital Reflex Mode D'emploi page 23

Raising the chair
• When the user is seated on the Reflex, first activate the brakes and then raise the seat.
• The seat section is moved upwards by pressing the knob on the back with the arrow
facing upwards. The seat frame of the Reflex will then steadily move upwards.
• You can stop this movement when the desired height is reached by releasing the knob.
• Maintain contact with the user while this upward motion is taking place.
Up button
Lowering the chair
• The seat section is moved down by pressing the knob on the back with the arrow facing
down. The seat frame of the Reflex will then steadily lower.
• You can stop this movement when the desired height is reached by releasing the knob.
• If an obstacle blocks the downward movement of the chair, this downward movement
is automatically cut out. The chair can only be raised.
• Maintain contact with the user while this downward motion is taking place.
Down button
Mobile shower seat 'Reflex' | Instructions for use | 23
Controlpanel