Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Maintenance
• The Reflex must be cleaned after each use with water and normal household cleaning
agents. Do not use abrasives or other aggressive solvents (such as chlorine).
• When the Reflex must be disinfected, we recommend using Neoquat combi
use an alcohol solution.
• Regularly check the wheels for hairs and dust, remove if necessary.
• Remove excess soap remnants.
• Lopital Nederland B.V. recommends concluding an annual maintenance contract for the
Reflex.
• Maintenance and repairs must only be carried out by authorised staff.
Technical specifications
Construction
Frame from steel tubes and panels with a dual layer of powder coating
Stainless steel hinges
Stainless steel and plastic sealing caps
PVC castor wheels, Ø 125 mm, double blocking option
PUR (polyurethane) body support
Reflex weight 55kg, maximum load 135kg
Drive unit
Electric motors 24 V
Stainless Steel spindle for up/down movement
24 V actuator for the tilt adjustment
Battery capacity 7Ah, charger 220 V/50/60 Hz
Dimensions
Adjustable seat height of 490-1010 mm
Backrest height 930-1450 mm
Seat depth 485 mm, seat width 480 mm
Total length of the basic frame 880 mm, total width of the basic frame 660 mm
Foot support adjustment 230 mm
Headrest adjustment depth/height 70/120 mm
Continuously variable tilt 30° to rear
Mobile shower seat 'Reflex' | Instructions for use | 29
. Do not
®
Publicité
Table des Matières
