Storage And Transport; Removal Of Parts; Technical Specifications; Structure - lopital Elexo XXL Mode D'emploi

6. Storage and transport

During transport and storage, the ambient conditions must remain moderate. In other
words, the temperature should remain between -40 and +55 degrees Celsius (-40 to 130
degrees Fahrenheit) and humidity levels should be kept as low as possible. Vibration
during transport must be kept to a minimum in order to avoid damaging the hinged
mechanisms on the chair. The chair must be switched off during transport
(See paragraph 4.4. On / Off switch).

7. Removal of parts

All parts that are replaced or removed can be sent back to Lopital BV. You may also offer
the parts to the engineer for destruction. We will ensure that all parts are processed in
an environmentally-friendly manner.
If you take care of disposal of the product yourself, you must take account of the fact that
batteries and chargers must be disposed of as small chemical waste.

8. Technical Specifications

The Elexo XXL Shower-toilet chair belongs to category 'BF'.
The Elexo XXL Shower-toilet chair is a class 2 product.
The Elexo XXL is splash-proof; this means that the Elexo XXL can be used under the sho-
wer. This is given with instruction IPX4.

8.1. Structure

Frame:
Hinge points :
Wheels :
Body support :
Weight :
Maximum permitted load :
stainless steel and steel tubes and plates that are
equipped with a 2-layer powder coating
stainless steel, cover caps made of plastic V0
plastic, Ø 12.5 cm, double blocking facility
PUR (polyurethane).
75 kg
220 kg
Elexo XXL Shower-toilet chair | Instructions for use | 39