Ryobi RBC42FSBO Manuel D'utilisation page 29

Masquer les pouces Voir aussi pour RBC42FSBO:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
chemicals and de-icing salts.
■ Do not store outdoors.
SYMBOLS
Some of the following symbols may be used on your
brushcutter/grass trimmer. Please study them and learn
their meaning. Proper interpretation of these symbols
allows you to operate the product better and safer.
Safety alert
To avoid serious personal injury, do not
attempt to use the product until you read
thoroughly and understand completely the
operator's manual.
Beware of thrown or fl ying objects. Keep
all bystanders, especially children and
pets, at least 15 m from the operating
area.
This guard is not intended for use with a
toothed saw type blade.
Rotational direction and maximum speed
of the shaft for the cutting attachment.
7,370
min
-1
Wear non-slip safety footwear when using
the product.
Wear non-slip, heavy-duty gloves.
Beware of blade thrust.
Wear eye, ear, and head protection.
To reduce the risk of injury or damage,
avoid contact with any hot surface.
Keep hands away from blades.
Keep hands away from saw blades.
Hot surface
Use unleaded petrol intended for motor
vehicle use with an octane rating of 91 [(R
+ M)/2] or higher.
Use 2-stroke oil for air cooled engines.
English (Original instructions)
18
Mix the fuel mix thoroughly and also each
time before refueling
Conforms to all regulatory standards in
the country in the EU where the product
is purchased.
EurAsian Conformity Mark
Ukrainian mark of conformity
10
Tri-Arc™ blade
Ignition switch: O = STOP, I = RUN
Fully press and release the primer bulb
10
10 times.
Pull the starter grip to start the engine.
Squeeze throttle trigger to run.
Starting a cold engine by hand
Starting a warm engine by hand
Starting a cold engine by electrical
starter
Starting a warm engine by electrical
starter
Direction of handle rotation
Guaranteed sound power level is 112 dB.
Choke closed
Choke open
Pull: Quick release tab
Straight shaft symbol: When fi tting the
line spool to the cutting means, this
symbol should be visible to the operator.

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Rbc52fsboRbc52fsbos

Table des Matières