Ascend X2 PERFORMANCE Manuel D'utilisation page 9

ASSEMBLY INSTRUCTIONS
STEP 1
INITIAL SETUP AND CALIBRATION
Setting up your new Ascend X2 is straightforward and user-friendly. While the process is simple, we
recommend having a helper on hand to ensure a smooth and safe assembly. Let's get started with the
easy steps to set up your treadmill and walking pad.
Setting Up the Handlebar Support Tubes
1. Position the Treadmill: Ensure the Ascend X2 treadmill is on a flat and stable surface,
away from any obstructions.
2. Open the post locking latch by pulling on the large gray handle.
3. Lift the posts: With the help of your assistant, lift both posts to their upright position.
4. Close the gray handle while firmly holding the posts in place. Repeat the process on the
other side.
5. Check Stability: Gently shake the posts to ensure they are securely locked and stable.
8
ASCEND X2 // PERFORMANCE 2 IN 1 TREADMILL AND WALKING PAD