MAINTENANCE AND CARE
BELT ADJUSTMENT GUIDE
Your treadmill's running belt is meticulously calibrated to the deck during manufacturing. However,
with time and usage, it might stretch and need recalibration. Here's a straightforward guide to help
you adjust the belt:
1.
Initial Setup:
•
Power on the treadmill.
•
Set the belt to operate at a speed between 3-4 km/h.
2.
Identifying the Adjustment Bolts:
•
You'll need the Allen Wrench included with your treadmill for this process.
•
The adjustment bolts are located at the treadmill's rear.
3.
For a Belt Drifting to the Left:
•
Focus on the left adjustment bolt.
•
Give it a 1/4 turn clockwise.
The belt should start realigning itself towards the center.
4.
For a Belt Drifting to the Right:
•
Concentrate on the right adjustment bolt.
•
Turn it 1/4 turn clockwise.
•
The belt should begin moving back to the center.
ASCEND X2 // PERFORMANCE 2 IN 1 TREADMILL AND WALKING PAD
ASCEND X2 // PERFORMANCE 2 IN 1 TREADMILL AND WALKING PAD
25