Télécharger Imprimer la page

Ascend X2 PERFORMANCE Manuel D'utilisation page 30

Publicité

Les langues disponibles

Les langues disponibles

TROUBLESHOOTING
1. Treadmill doesn't power on
Solution:
Ensure the power cord is securely plugged into the treadmill and a working electrical outlet.
Check the power cord for any visible damage.
Ensure the safety key is properly inserted.
2. The treadmill belt jumps or feels uneven
Solution:
Check the belt tension and alignment. Adjust according to the user manual's guidelines.
Ensure the treadmill is placed on a flat, stable surface. You might need a level to verify the
surface.
Consider lubricating the belt if it hasn't been done recently. Use the proper lubricant sold on
www.movewithascend.com
3. The treadmill makes unusual noises during operation
Solution:
Ensure all screws, bolts, and hardware are tightened.
Check the belt for any signs of wear or damage. Replace if necessary.
Ensure the treadmill is on a stable surface to prevent wobbling.
Clean the treadmill and vacuum under the motor cover as debris can rub with the treadmill
moving parts and create noise.
Lubricate the belt by following our guide in this manual.
4. Display screen is not working or showing incorrect data.
Solution:
Ensure the treadmill is properly powered on.
Check for any visible damage to the display or control panel.
Reset the treadmill by turning it off and on.
5. Difficulty connecting to fitness apps (Zwift, Kinomap).
Solution:
Ensure your device's Bluetooth is turned on and is in proximity to the treadmill.
Check for any updates for the respective app.
Restart both the treadmill and your device, then try connecting again.
6. Treadmill suddenly stops during a workout.
Solution:
Ensure the safety key is securely attached.
Check the power source and ensure the power cord is securely plugged in.
If the treadmill overheats, allow it to cool down for at least 30 minutes before using it again. This
might be caused by overuse of the treadmill or a dirty motor.
7. The treadmill starts, but the belt doesn't move
Solution:
Ensure the safety key is properly inserted.
ASCEND X2 // PERFORMANCE 2 IN 1 TREADMILL AND WALKING PAD
29

Publicité

loading

Produits Connexes pour Ascend X2 PERFORMANCE