Ascend X2 PERFORMANCE Manuel D'utilisation page 25

MAINTENANCE AND CARE
MONTHLY MAINTENANCE OR AFTER EVERY 20 HOURS OF USE
Lubrication: The treadmill belt requires regular lubrication to ensure smooth operation and reduce
friction. Using the recommended lubricant from movewithascend.com, apply a thin layer beneath
the belt with the application tube. This not only prolongs the life of the belt but also ensures
efficient motor performance. Not lubricating the belt regularly may damage the product and will
void the warranty.
Vacuum Inside: Unscrew gently remove the motor cap and vacuum inside the treadmill to remove
any accumulated dust or debris. Be cautious around wires and components to avoid damage.
Hardware Check: Regularly inspect all screws, bolts, and other hardware components. Over time,
these can become loose due to the treadmill's vibrations. Tighten any components that feel loose
to ensure the treadmill's stability and safety.
Belt Tension: The treadmill belt should have a slight give when pressed but should not be too loose.
Check its tension by pressing down in the center of the belt. If it feels too slack or too tight, refer to
the user manual for adjustment instructions.
Belt Alignment: Over time, the treadmill belt might drift to one side. Ensure it's centered and
aligned. If you notice the belt drifting during workouts, stop the machine immediately and zfollow
the user manual's guidelines for realignment. Proper alignment ensures even wear and reduces
strain on the motor.
24
ASCEND X2 // PERFORMANCE 2 IN 1 TREADMILL AND WALKING PAD