Ascend X2 PERFORMANCE Manuel D'utilisation page 10

ASSEMBLY INSTRUCTIONS
PART LISTING
STEP 2
Installing the Console
1. Begin with one person holding the console above the handle bars like in
the picture above.
2. The other must locate the console cable inside the right arm. Connect this
cable to its counterpart located inside the right tube of the console.
3. Carefully slide the console into both arms simultaneously. Ensure the
cable is not pinched or caught while doing this.
4. Once the console is fully inserted, you'll notice that the four holes on the
console align with those on the arms.
5. Secure the console by inserting the 4 hex screws in the 4 holes . Tighten
these screws into place using the S3 T-wrench provided.
9
ASCEND X2 // PERFORMANCE 2 IN 1 TREADMILL AND WALKING PAD