Ascend X2 PERFORMANCE Manuel D'utilisation page 14

FEATURES AND FUNCTIONS
UNFOLDING/FOLDING THE MACHINE
Unfolding the Machine
1. Before unfolding, ensure the treadmill is powered off and unplugged.
2. Locate the gray handle on the right side of the treadmill.
3. Open the handle to disengage the post locking mechanism.
4. Lift the posts into their upright position.
5. Once in place, secure them by pushing the gray handle back to its original position.
6. Raise both handle bars to their full position.
7. Tighten them in place by screwing the knobs located on both sides of the back of the console.
Folding the Machine
1. Before folding, ensure the treadmill is powered off and unplugged.
2. Start by loosening the knobs located on both sides of the back of the console to release the
handle bars.
3. Gently lower the handles bars to their folded position.
4. Locate the gray handle on the right side of the treadmill.
5. Pull the handle to release the posts.
5. Carefully lower the posts to their folded position.
6. Once they're down, secure them by returning the gray handle to its original position.
ASCEND X2 // PERFORMANCE 2 IN 1 TREADMILL AND WALKING PAD
13