Ascend X2 PERFORMANCE Manuel D'utilisation page 11

ASSEMBLY INSTRUCTIONS
STEP 3
Setting Up the Handlebars and Tablet Holder
A. Handlebars Installation:
1. Retrieve the 2 Knobs (S4) from the accessories bag.
2. Lift the handle bars to their upright position.
3. Align the fixing hole and begin to screw in the Knob (S4). While screwing, you
may need to apply pressure underneath the handle bars against the Knob to
ensure the S4 nut fits securely inside the arm.
4. Repeat the process on the other side.
B. Tablet Holder Installation:
1. First, remove the S8 screw from the tablet holder (S7).
2. Slide the tablet holder (S7) into its corresponding holes on the console.
3. Secure the Tablet Holder (S7 ) to the back of the console using the
T Wrench (S3).
10
ASCEND X2 // PERFORMANCE 2 IN 1 TREADMILL AND WALKING PAD