Cleaning And Storing The Device And Cuff - Beurer BC 30 Mode D'emploi

and optional accessories according to
applicable local regulations. Unlawful disposal
may cause environmental pollution.
• Never attempt to repair, open and/or
disassemble the unit (including wrist cuff and
optional accessory) or adjust it yourself. This
may damage the unit and impair the functions.
If you need to have the unit repaired, please
contact our customer service. Please
see warranty for service contact. Before
submitting any complaint, first check the
batteries and replace them if necessary.
• Changes or modifications to the device will
nullify the user warranty.
• Do not drop or insert any object into any
opening. This may damage the unit.
• Do not press the buttons with excessive force
or with pointed objects.
• To conserve the batteries, the monitor
switches off automatically if no buttons are
pressed for 3 minutes.
• The device is only intended for the purpose
described in these instructions for use.
The manufacturer is not liable for damage
resulting from improper or careless use.
• If you are using the unit for the first time,
please remove the protective film from the
display.
• The monitor can maintain the safety and
performance characteristics for a minimum
of 10.000 measurements or 3 years.
• Further documents which include information
for the Calibration of the device can be asked
at the service address.
• The device can be tested in case of supposed
inaccuracy every two years. Please contact
the nearest service address.
Cleaning and storing the device and
cuff
To keep your digital blood pressure monitor in the
best condition and protect the unit from damage
follow the directions listed below:
12