Advice On Use - Beurer BC 30 Mode D'emploi

• Do not use any cleaning agents or solvents.
• Under no circumstances hold the device and
cuff under water, as this can cause liquid to
enter and damage the device and cuff.
• If you store the device and cuff, do not place
heavy objects on the device and cuff. Remove
the batteries.
• Clean your device and cuff carefully only
with a slightly moistened soft cloth and dry it
immediately with a soft dry cloth.
• When storing the device, make sure that no
heavy objects are placed on top of it.
• Do not fold the cuff tightly. If the unit is stored
near freezing, allow it to acclimate to room
temperature before use.
• Always store the unit in its storage case after
use.
• This unit may not meet its performance
specifications if stored or used outside of the
temperature and humidity ranges (see section
'13. Technical Specifications').
• Use the unit consistent with the instruction
provided in this manual.
• The blood pressure monitor is made from
precision and electronic components. The
accuracy of the measurements and service life
of the device depend on its careful handling:
– Protect the device from impacts, humidity,
dirt, marked temperature fluctuations and
direct sunlight.
– Do not drop the device.
– Do not use the device in the vicinity of strong
electromagnetic fields and keep it away
from radio systems or mobile telephones.
• Do not press the buttons before the cuff is
placed on the arm.
• We recommend that the batteries be removed
if the device will not be used for a prolonged
period of time.

Advice on use

• For consistency, always measure your blood
pressure at the same time each day.
13