Integra CRW Manuel De L'utilisateur page 16

EN – English
Installing the Ear Bars (Optional)
Assembling the Ear Bar
1. Loosen the nylon thumb screw on the ear bar support
bracket to place the ear bar in the bracket.
2. Fit the support brackets on opposite sides of the head ring,
then finger tighten the attachment thumb screws.
Note The scales on the sides of the head ring are for
reference only and allow for alignment of the head
ring to the patient.
15 . Chapter 3 . Assembling the Universal Compact Head Ring
Nylon Thumb
Nylon
Screw
Thumb Screw
Ear Bar
Ear Bar
Support
Support
Bracket
Bracket
Attachment
Attachment
Thumb Screw
Thumb Screw
Index Marks on Ear Bar Index Marks on Ear Bar
Ear Bar Ear Bar
Side View of
Side View of
Head Ring
Head Ring
Attachment
Thumb Screws