Integra CRW Manuel De L'utilisateur page 15

2. See the picture to the right for a sample of a properly
assembled head ring.
Note The "lip" that goes around the head ring should be on
the bottom.
Note To prevent breaking the head post attachment screws,
ensure that the post screws are tightened so that the
post is flush with the head ring before tightening the
disposable head ring screws.
Attaching the Head Ring Screw Cross Bar (Optional)
1. Align the cross bar holes with the head ring screw holes of
the anterior head ring posts.
2. Attach the cross bar with the cross bar attachment screws
to the anterior head ring posts.
Note If you are not using the optional head ring screw cross bar, proceed to
"Installing the Ear Bars (Optional)" on page 13).
Caution: To avoid placement of the head ring screws into the temporalis muscle,
use head ring cross bar.
Head ring screw holes
Cross Bar Attachment Screw
Chapter 3 . Assembling the Universal Compact Head Ring . 14
EN – English
Lip