Publicité
– Always disconnect the probes from the measuring circuit before
CAUTION
– Use the device with the cables provided.
– Repair or service that is not covered in this manual should only be
– Applying excessive voltage or overloading the device will cause
– Clean the case with a soft, lint-free, slightly dampened cloth. Do not use
– The instrument is designed for use in Overvoltage Category II and
– The input voltage range for the instrument is 100 to 240 VAC. Mains
Keysight U2701A/U2702A User's Guide
disconnecting the adapter.
performed by qualified personnels.
irreversible damage to the circuitry.
detergent, volatile liquids, or chemical solvents.
Pollution Degree 2.
supply voltage fluctuations are not to exceed ± 10% of the nominal supply
voltage.
7
Publicité
