Publicité
2
Scope Features and Functions
To configure edge triggering
1 Select the desired trigger source on the trigger source panel.
2 On the Trigger Settings panel, click on the Edge button.
3 Select the trigger level by adjusting the knob or by clicking on
4 Enter the desired holdoff time and unit, then click on Set to proceed.
5 Select the desired slope on the Edge Trigger Settings panel.
– To trigger both edges of a clock, use Alternating edge mode.
NOTE
– To trigger on any activity of a selected source, use Either edge mode.
44
Keysight U2701A/U2702A User's Guide
or
.
Publicité
