Publicité
2
Scope Features and Functions
Channel Options
Channel options provide four types of adjustment to the channel's waveform:
– AC Coupling
– Invert
– BW Limit and
– Attenuation (1X, 10X, 100X)
Channel Coupling Control
The AC coupling control is used to remove any DC offset voltage on a waveform.
By setting the coupling control to AC, the DC offset voltage is removed from the
input waveform.
To remove any DC offset voltage from channel 1, click on the
soft front panel. Click on the Channel Options
Coupling from the options list.
When AC coupling is not selected, the oscilloscope is always set to DC coupling
NOTE
mode by default.
32
button and select AC
Keysight U2701A/U2702A User's Guide
button on the
Publicité
