Publicité
2
Scope Features and Functions
Figure 2-3
Bandwid th Limit Control
The bandwidth limit control can be used to removed high frequency components
on a waveform that are not important to the analysis of the waveform.
To remove high frequency components from the waveform on channel 1, click on
the
and select BW Limit from the options list. The LowPass cutoff is at 25 MHz.
When the BW limit control is not selected, the oscilloscope is set to full
NOTE
bandwid th.
34
The waveform after inversion
button on the soft front panel. Click on the Channel Options
Keysight U2701A/U2702A User's Guide
button
Publicité
