Publicité
Scope Features and Functions
2
Invert Control
The invert control inverts the displayed waveform with respect to the ground level.
When the oscilloscope is triggered on the inverted waveform, the trigger is also
inverted as well.
Click on the Stop button to stop the signal acquisition. To invert the waveform on
channel 1, click on the
button on the soft front panel. Click on the
channel options button and select Invert from the options list.
Figure 2-2
and
Figure 2-3
show the changes before and after conversion.
Figure 2-2
The waveform before inversion
Keysight U2701A/U2702A User's Guide
33
Publicité
