Publicité
2
Scope Features and Functions
6 To zoom out, right-click on the zoom reference panel and select Zoom Out
Figure 2-21
7 Select Restore Default from the menu to reset the zoom level to default.
To pan an acquired waveform
1 Click on the Stop button to stop the signal acquisition.
2 Go to Analog panel by clicking the Analog button on the toolbar or press Ctrl + 1.
3 On Delay panel, use the
4 Alternatively, you can use the zoom reference panel above the waveform graph
78
from the menu. Repeat the same action to further decrease the zoom level.
Zoom Out
You may also turn the knob to control the panning.
display to pan the graph. Click and hold the area in the zoom area selection
bar, then drag left or right to pan the graph. The analog trigger point will move
in respond to the panning of the graph.
or
arrow key to pan your graph right or left.
Keysight U2701A/U2702A User's Guide
Publicité
