Publicité
2
Scope Features and Functions
Time Base
Time base allows you to control how often the values are digitized.
To control the horizontal sweep speed,
Delay
Delay setting allows you to set the specific location of the trigger event with
respect to the time reference position When the delay time knob is turned, the
trigger point will move to left or right of the waveform graph display.
To adjust the delay time,
38
– Click on
or press Crtl+[ to increase sweep speed.
– Click on
or press Crtl+] to decrease sweep speed.
– Select the time base from the drop-down list provided to adjust the
horizontal sweep speed.
– Click on
or press Crtl+Left to increase the delay time.
– Click on
or press Crtl+Right to decrease the delay time.
Trigger point
Keysight U2701A/U2702A User's Guide
Publicité
