Publicité
Acquisition Mode
The figure below shows the Acquisition Mode on the soft front panel.
The U2701A/U2702A scopes have the following acquisition modes.
Table 2-9
List of Acquisition Modes
Menu
Settings
Mode
Normal
Peak Detect
Average
To reduce the displayed random noise, select Average acquisition. This mode will
decrease the screen refresh rate.
To avoid waveform aliasing, select Peak Detect acquisition. Peak Detect mode
captures the maximum and minimum values of a waveform over multiple
acquisitions.
Keysight U2701A/U2702A User's Guide
Comments
Normal acquisition mode is for most waveforms with normal decimating at
slower sweep speeds, no averaging.
Peak Detect acquisition mode is
infrequently (at slower sweep speeds).
Average acquisition mode is for reducing noise and increasing resolution (at all
sweep speeds without bandwidth or rise time degradation).
Scope Features and Functions
for displaying narrow pulses that occur
2
71
Publicité
