Publicité
X and Y Cursors
To enable Cursors control, the Manual option on the Markers property must be
selected as shown below.
– X cursors places two cursors on the X-Axis of the waveforms to measure the
– Y cursors places two cursors on the Y-Axis of the waveforms to measure the
To configure Auto marker
The Auto marker function will automatically place indicators on the waveforms
displayed on the graph to show the selected measurements.
1 Obtain and establish a stable signal on the waveform acquisition graph.
2 Click on the Measurements & Cursors button and select Auto at the Markers
3 Proceed to select your desired measurements on the Measurements panel.
4 Markers will be automatically placed on the waveform to indicate the
5 Browse the measurement results on the Measurement Results panel to view
Keysight U2701A/U2702A User's Guide
time difference between the two cursors (X2 minus X1). Delta X denotes the
time difference.
voltage difference between the two cursors (Y2 minus Y1). Delta Y denotes the
voltage difference.
property.
measurements made.
different markers for different measurements.
Scope Features and Functions
2
51
Publicité
