Work Area Safety; Electrical Safety; Personal Safety - Stihl HSA 94 R Notice D'emploi

Masquer les pouces Voir aussi pour HSA 94 R:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

22 General Power Tool Safety Warnings

22.2 Work area safety

a) Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.

22.3 Electrical safety

a) Power tool plugs must match the outlet. Never modify the
plug in any way. Do not use any adapter plugs with
earthed (grounded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces,
such as pipes, radiators, ranges and refrigerators. There
is an increased risk of electric shock if your body is
earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water
entering a power tool will increase the risk of electric
shock.
d) Do not abuse the cord. Never use the cord for carrying,
hanging up, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk of electric
shock.
e) When operating a power tool outdoors, use an extension
cord suitable for outdoor use. Use of a cord extension
suitable for outdoor use reduces the risk of electric shock.
f) If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk of
electric shock.
0458-722-9621-A
All manuals and user guides at all-guides.com

22.4 Personal safety

a) Stay alert, watch what you are doing and use common
b) Use personal protective equipment. Always wear eye
c) Prevent unintentional starting. Ensure the switch is in the
d) Remove any adjusting key or wrench before turning the
e) Do not overreach. Keep proper footing and balance at all
f) Dress properly. Do not wear loose clothing or jewellery.
g) If devices are provided for the connection of dust
h) Do not let familiarity gained from frequent use of tools
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol or medication. A moment of inattention while
operating power tools may result in serious personal
injury.
protection. Protective equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
off position before connecting to power source and/or
battery pack, picking up or carrying the power tool.
Carrying power tools with your finger on the switch or
energising power tools that have the switch on invites
accidents.
power tool on. A wrench or a key left attached to a rotating
part of the power tool may result in personal injury.
times. This enables better control of the power tool in
unexpected situations.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair can be caught
in moving parts.
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can
reduce dust-related hazards.
allow you to become complacent and ignore tool safety
principles. A careless action can cause severe injury
within a fraction of a second.
English
49

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Hsa 94 t

Table des Matières