General Power Tool Safety Warnings; Work Area Safety; Electrical Safety - Stihl HSE 61 Notice D'emploi

18 General Power Tool Safety Warnings

tions 2001, Anhang 8, using the ISO 11094
standard.
Measured sound power level
HSE 61
500 mm blade:
600 mm blade:
HSE 71
600 mm blade:
700 mm blade:
HSE 81
500 mm blade:
600 mm blade:
700 mm blade:
Guaranteed sound power level
HSE 61
500 mm blade:
600 mm blade:
HSE 71
600 mm blade:
700 mm blade:
HSE 81
500 mm blade:
600 mm blade:
700 mm blade:
Technical documents deposited at:
ANDREAS STIHL AG & Co. KG
The year of construction, the country of manufac‐
ture and the machine number are shown on the
machine.
Done at Waiblingen, 15.07.2021
ANDREAS STIHL AG & Co. KG
pp
Dr. Jürgen Hoffmann
Director Product Certification & Regulatory
Affairs
18 General Power Tool Safety
Warnings
This chapter reproduces the pre-formulated, gen‐
eral safety precautions specified in the EN 60745
0458-279-9921-E
European standard for hand-held motor-oper‐
ated electric tools. STIHL is required by law to
print these standardized texts verbatim.
The safety precautions and warnings on avoiding
an electric shock given under "2) Electric Pre‐
96 dB(A)
cautions" do not apply to STIHL cordless electric
96 dB(A)
power tools
99 dB(A)
99 dB(A)
Read all safety warnings and instructions. Failure
to follow the warnings and instructions may result
99 dB(A)
99 dB(A)
in electric shock, fire and/or serious injury.
99 dB(A)
Save all warnings and instructions for future ref‐
erence.
The term "power tool" in the warnings refers to
98 dB(A)
your mains-operated (corded) power tool or bat‐
98 dB(A)
tery-operated (cordless) power tool.
18.1
101 dB(A)
101 dB(A)
a) Keep work area clean and well lit. Cluttered
101 dB(A)
b) Do not operate power tools in explosive
101 dB(A)
101 dB(A)
c) Keep children and bystanders away while
18.2
a) Power tool plugs must match the outlet.
b) Avoid body contact with earthed or grounded
c) Do not expose power tools to rain or wet
d) Do not abuse the cord. Never use the cord
WARNING

1) Work area safety

or dark areas invite accidents.
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
operating a power tool. Distractions can
cause you to lose control.

2) Electrical safety

Never modify the plug in any way. Do not
use any adapter plugs with earthed (groun‐
ded) power tools. Unmodified plugs and
matching outlets will reduce risk of electric
shock.
surfaces, such as pipes, radiators, ranges
and refrigerators. There is an increased risk
of electric shock if your body is earthed or
grounded.
conditions. Water entering a power tool will
increase the risk of electric shock.
for carrying, pulling or unplugging the power
tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entan‐
gled cords increase the risk of electric shock.
English
33