Inserting And Removing Connecting Cable Plug; Inserting The Connecting Cable Plug; Switching The Hedge Trimmer On/Off; Removing The Connecting Cable Plug - Stihl HSA 94 R Notice D'emploi

7 Inserting and Removing Connecting Cable Plug

7 Inserting and Removing Connecting
Cable Plug
7.1

Inserting the Connecting Cable Plug

2
► Hold connecting cable plug (1) so that the arrow on its side
lines up with the arrow on the socket (2).
► Insert the connecting cable plug (1) in the socket (2).
The plug (1) engages in position.
7.2

Removing the Connecting Cable Plug

2
► Grip the connecting cable plug (1) with your hand.
► Pull the plug (1) out of the socket (2).
0458-722-9621-A
All manuals and user guides at all-guides.com
1
1

8 Switching the Hedge Trimmer On/Off

8.1 Switching On
WARNING
The motor accelerates and the cutting blades run regardless
of the sequence in which the switch lever and trigger are
depressed. If you depress the trigger first and then the
switch lever, you may lose control of the hedge trimmer. This
can result in serious injuries.
► Depress the switch lever first and then the trigger.
1
► Depress the switch lever (1) and hold it in that position.
► Push the retaining latch (2) with your thumb to position
.
► Depress the trigger lockout (3) with your hand and hold it
there.
► Pull the trigger (4) with your index finger and hold it there.
The motor accelerates and the cutting blades run.
The more you depress the trigger, the faster the cutting
blades run.
8.2 Switching Off
► Release the switch lever, trigger and lockout lever.
► Wait until the cutting blades come to a complete standstill
after about 1 second.
English
2
3
4
39