Inserting And Removing The Battery; Inserting The Battery; Removing The Battery - Stihl HTA 66 Notice D'emploi

Masquer les pouces Voir aussi pour HTA 66:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

15 Inserting and Removing the Battery

► Using the grip, press the cap down firmly while turning it
clockwise to the closed position (approximately 1/4 turn).
In the closed position, the interior (4) and exterior (1)
positioning marks will align with the closed symbol (3) on
the chain oil tank housing.
► Fold the grip flush with the top of the cap and check for
tightness.
► If the grip does not lie completely flush with the cap or the
detent on the grip does not fit in the corresponding recess
in the tank opening, or if the cap is loose, the cap is not
properly seated and you must repeat the above steps.
15 Inserting and Removing the Battery

15.1 Inserting the Battery

WARNING
Never use a malfunctioning, damaged, cracked, leaking or
deformed battery, @ 8. Use and store the battery only
within an ambient temperature range of 14 °F to 122 °F (- 10
°C to 50 °C), @ 8.
WARNING
To reduce the risk of unintended activation, never store the
battery in the pole pruner, @ 8.
To insert the battery:
1
2
► Place the pole pruner on a level surface.
0458-191-8221-A
► Insert the battery (1) into the battery compartment (2) until
it stops.
The battery is properly inserted when you hear an audible
click. In this position, there is electrical contact between
the battery and the pole pruner.
Since a new battery is not fully charged, STIHL recommends
that you fully charge the battery before using it the first time,
@ 11.

15.2 Removing the Battery

WARNING
To reduce the risk of severe personal injury from unintended
activation, always remove the battery before assembling,
transporting, adjusting, cleaning, servicing, maintaining or
storing the pole pruner, and any other time it is not in use.
WARNING
Use care when ejecting the battery to prevent it from falling
and causing personal injury or property damage.
To remove the battery:
► Release the trigger switch.
► Place the pole pruner on a level surface.
► Compress the locking levers (1) to eject the battery (2)
from the battery compartment.
1
1
2
English
33

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Hta 86

Table des Matières