Télécharger Imprimer la page

State Of Charge; Leds On Battery; Led On Charger; Removing And Fitting The Battery - Stihl HSA 56 Notice D'emploi

Masquer les pouces Voir aussi pour HSA 56:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

7 Removing and Fitting the Battery

2
4
1
► Insert the plug (6) in a convenient wall outlet
(7).
The charger (3) runs a self test. The LED (4)
glows green for about 1 second and then red
for about 1 second.
► Fit the connecting cable (5).
► Insert the battery (2) in the guides in the
charger (3) and press it home as far as stop.
The LED (4) glows green. The LEDs (1) glow
green and the battery (2) is being charged.
► If the LED (4) and the LEDs (1) stop glowing:
The battery (2) is fully charged and can be
taken out of the charger (3).
► If the charger (3) is no longer required. Dis‐
connect the plug (6) from the wall outlet (7).
6.3

State of Charge

1
► Press the button (1).
The LEDs (5) glow green for about 5 seconds
and indicate the state of charge.
► If the LED on the right flashes green: Charge
the battery.
6.4

LEDs on Battery

The LEDs can show the state of charge or mal‐
functions. The LEDs can glow or flash green or
red.
The state of charge is indicated when the LEDs
glow or flash green.
► If the LEDs glow or flash red: Troubleshooting,
17.
There is a malfunction in hedge trimmer or
battery.
0458-714-9621-C
3
7
6
5
80-100%
60-80%
40-60%
20-40%
0-20%
6.5

LED on Charger

The LED indicates the operating status of the
charger.
If the LED glows green, the battery is being
charged.
► If the LED flashes red: Rectify the malfunction.
Malfunction in charger.
7
Removing and Fitting the
Battery
7.1
Fitting the Battery
1
2
► Insert the battery (1) in the battery compart‐
ment (2) and press it home until you hear a
click.
Arrows (3) on battery (1) are still visible and
battery (1) is held securely in battery compart‐
ment (2). There is no electrical contact
between the hedge trimmer and battery (1).
► Push the battery (1) into the battery compart‐
ment (2) as far as stop.
The battery (1) engages with a second click
and is flush with the hedge trimmer's housing.
7.2
Removing the Battery
► Stand the hedge trimmer on a level surface.
► Press the locking lever (1).
The battery (2) is unlocked and can be
removed.
English
3
2
1
33

Publicité

loading