Télécharger Imprimer la page

Assembling The Hedge Trimmer; Removing And Fitting The Battery - Stihl HLA 56 Notice D'emploi

Masquer les pouces Voir aussi pour HLA 56:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

7 Assembling the Hedge Trimmer

► Press the button (1).
The LEDs (5) glow green for about 5 seconds
and indicate the state of charge.
► If the LED on the right flashes green: Charge
the battery.
6.3
LEDs on Battery
The LEDs can show the state of charge or mal‐
functions. The LEDs can glow or flash green or
red.
The state of charge is indicated when the LEDs
glow or flash green.
► If the LEDs glow or flash red: Troubleshooting,
18.
There is a malfunction in hedge trimmer or
battery.
7
Assembling the Hedge
Trimmer
7.1
Mount the Cutter Bar
► Switch off the long-reach hedge trimmer and
remove the battery.
► Fit the blade scabbard so that it completely
covers the cutting blades.
1
2
► Line up the coupling sleeve (1) and cutter bar
(2) so that the groove (3) and lug (4) face
upwards.
► Push the cutter bar (2) into the coupling sleeve
(1).
► Turn the wing screw (5) clockwise and tighten
it until firm.
7.2
Mounting the Loop Handle
► Switch off the long-reach hedge trimmer and
remove the battery.
0458-816-9621-C
3
4
5
1
2
5
6
7
► Fit the clamp (4) in the loop handle (3).
► Place the loop handle (3) with clamp (4) on the
shaft (5).
► Fit the washers (2) on the screws (1).
► Press the clamp (6) against the shaft (5).
► Insert the screws (1) through holes in the loop
handle (3) and clamps (4 and 6).
► Screw on and firmly tighten the nuts (7).
8
Removing and Fitting the
Battery
8.1
Fitting the Battery
1
3
2
► Insert the battery (1) in the battery compart‐
ment (2) and press it home until you hear a
click.
The cooling slots (3) are still visible and the
battery (1) is held securely in the battery com‐
partment (2). There is no electrical contact
between the hedge trimmer and battery (1).
► Push the battery (1) into the battery compart‐
ment (2) as far as stop.
The battery (1) engages with a second click
and the cooling slots (3) are no longer visible.
8.2
Removing the Battery
► Lay the hedge trimmer on a level surface.
► Hold one hand in front of the battery compart‐
ment to ensure the battery (2) does not fall
out.
English
1
2
3
4
7
29

Publicité

Dépannage

loading