Converting The Trimmer For Edging; Inserting And Removing The Activation Key; Inserting The Activation Key - Stihl FSA 45 Notice D'emploi

13 Inserting and Removing the Activation Key

To adjust the position of the loop handle:
► Switch off the trimmer, @ 14.2.
► Remove the activation key, @ 13.2.
► Loosen the star knob (1).
► Adjust the loop handle (2) to the desired operating
position.
► Tighten the star knob securely.

12.3 Converting the Trimmer for Edging

WARNING
To reduce the risk of injury from loss of control, ensure that
the loop handle and drive tube are properly adjusted and the
trimmer head adjustment latch are locked and secured at all
times while working.
The trimmer can be converted for use in edging applications.
To convert the FSA 45:
► Switch off the trimmer, @ 14.2.
► Remove the activation key, @ 13.2.
0458-718-8221-A
2
1
1
2
► Depress and hold the drive tube release button (1).
► Turn the loop handle (2) 90° around the drive tube until it
locks.
► Release the drive tube release button.
► Press and hold the trimmer head adjustment latch (4).
► Tilt the drive tube (3) down until it locks.
► Release the trimmer head adjustment latch.
13 Inserting and Removing the Activation
Key

13.1 Inserting the Activation Key

WARNING
To reduce the risk of severe personal injury from unintended
activation, never store the activation key in the trimmer.
English
3
4
23