Operating The Hedge Trimmer; Holding And Controlling The Hedge Trimmer; Selecting Power Level; Rotating The Control Handle - Stihl HSA 94 R Notice D'emploi

10 Operating the Hedge Trimmer

10 Operating the Hedge Trimmer

10.1 Holding and Controlling the Hedge Trimmer

► Hold the hedge trimmer with one hand on the control
handle – wrap your thumb around the control handle.
► Hold the hedge trimmer with the other hand on the loop
handle – wrap your thumb around the loop handle.

10.2 Rotating the Control Handle

The control handle can be rotated to any one of three
positions to suit the application.
2
► Push the retaining latch (1) with your thumb to position
.
► Pull out and hold the handle lock (2).
0458-722-9621-A
All manuals and user guides at all-guides.com
1
3
► Rotate the control handle (3) clockwise or
counterclockwise.
► Release the handle lock (2).
► Continue to rotate the control handle (3) clockwise or
counterclockwise until it engages in position.

10.3 Selecting Power Level

One of three power levels can be selected to suit the
application. The LEDs indicate the selected power level. The
higher the power level, the faster the cutting blades can run.
The selected power level affects the battery's runtime. The
lower the power level, the longer the runtime.
1
► Push the retaining latch (1) with your thumb to position
.
The LEDs indicate the selected power level.
► Push the retaining latch (1) forwards and allow it to spring
back.
This selects the next power level. Power level 3 is followed
by power level 1, then 2, 3, etc.
► Push the retaining latch (1) forwards and allow it to spring
back as many times as necessary to select the required
power level.
10.4 Cutting
► Use lopping shears or a chainsaw to cut out thick
branches first.
English
41