Stihl Al 101 Charger; Conformity Mark; General Power Tool Safety Warnings; Introduction - Stihl HSA 56 Notice D'emploi

21 General Power Tool Safety Warnings

Thomas Elsner, Director Group Product Management and
Services

20.2 STIHL AL 101 Charger

This charger is manufactured and put on the market in
accordance with the following directives: 2006/95/EC (up to
19.04.2016), 2014/35/EU (from 20.04.2016), 2004/108/EC (up
to 19.04.2016), 2014/30/EU (from 20.04.2016) and 2011/65/
EU.
The complete EC Conformity Notice is available from
ANDREAS STIHL AG & Co. KG.
ANDREAS STIHL AG & Co. KG
Badstrasse 115
D-71336 Waiblingen
Germany

20.3 Conformity Mark

All relevant requirements set down in the Harmonized
Standards of the European Community are fulfilled.
All conformity regulations and technical requirements
applicable in the Eurasian Economic Community are
fulfilled.
HSA 56
21 General Power Tool Safety Warnings

21.1 Introduction

This chapter reproduces the pre-formulated, general safety
precautions specified in the EN 60745 European standard for
hand-held motor-operated electric tools.
STIHL is obliged to publish these texts.
The safety precautions and warnings on avoiding an electric
shock given under "2) Electric Precautions" do not apply to
STIHL cordless electric power tools.
Read all safety warnings and instructions. Failure to follow the
warnings and instructions may result in electric shock, fire and/
or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-
operated (corded) power tool or battery-operated (cordless)
power tool.

21.2 Work area safety

a) Keep work area clean and well lit. Cluttered or dark areas
invite accidents.
b) Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases or
dust. Power tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while operating a
power tool. Distractions can cause you to lose control.
English
51