Chopin Alveolab graph Installation Rapide Et Premier Test page 2

INSTALLING YOUR ALVEOLAB
A. Contents
Alveolab
*Upon first use or after a thorough clean, these accessories must be lubricated with a thin, smooth layer of oil.
B. Installation
We recommend that the Alveolab should be delivered installed by an authorized CHOPIN Technologies technician.
Keep the packaging, as the unit must be repacked when transported.
Place the Alveolab on a horizontal, stable surface.
Control any lean using the level provided.
• Do not place the Alveolab in front of a window,
especially if the window is exposed to direct
sunlight.
• Leave space of at least 20 cm around the unit
in all directions to ensure effective ventilation.
C. Connecting the power
1. Connect the two units at the rear of the Alveolab using the interconnecting cable.
2. Connect the unit using the power cable.
1
Power cable USB stick with
software and
user's manual
Spatula Oil dispenser
Roller* Rolling table*
2
Shielded Interconnecting cable
USB cable
Funnel Washer
bottle
10 resting plates*
Semi-automatic
dough cutter
Scoop Spirit level
Scraper