Edirol AUDIOCAPTURE UA-5 Démarrage page 61

Depending on the virtual memory setting or network-related settings, noise may occur.
Please make the following settings before use.
• In Chooser of the Apple menu, set AppleTalk to "Inactive."
(This setting is not changed as a result of turning off AppleTalk, as requested by
OMS when sequencer software is started up. You must change the setting yourself
using the "Chooser.")
• In the "Memory" Control Panel, set Virtual Memory to "Off."
• Depending on the way in which you connect to the Internet, use the UA-5 with the
following settings.
If you connect to the Internet via a LAN cable
Use while the LAN cable is connected.
If you connect to the Internet via the internal modem port, or are not connected
to the Internet
In the "TCP/IP" Control Panel, set "Connect via" to "PPP."
After you have made the settings, restart your Macintosh.
* Do not use software that accesses the network (such as a Web browser) at the same time that
you are using sequencer software or audio editing software.
Digitally recorded sound is distorted, is at the wrong
pitch, or contains noise
• If you are using a long optical digital cable, noise may be produced when the cable is
connected, or the sound may be distorted. We recommend that you use optical digital
cables that are no longer than one meter in length.
• Does the sampling frequency setting of your application match the setting of the UA-
5's sampling frequency switch?
Noise is heard in recorded sound
• [When the ADVANCE (mode select) switch is OFF]
If the USB audio driver included with your operating system is 1.0.4 or earlier, please
upgrade to 1.0.5f4.
The North American version of this can be downloaded from the following address:
http://download.info.apple.com/Apple_Support_Area/Apple_Software_Updates/
English-North_American/Macintosh/Display-Peripheral/Video/
Multimedia_Update_1.0.smi.bin(This URL may change without notice.)
Checking the USB audio driver
1.
Connect the UA-5.
2.
Click the Apple menu, and select Apple System Profiler.
3.
Click the Devices and Volumes tab.
4.
Below the USB section you will see "Audio (UA-5 USB Audio Device)." Click
the arrow at the left of this text.
5.
Several lines will be displayed, but the number displayed at the right of
"Driver version" is the version of the USB Audio Driver.
Troubleshooting
61