Edirol AUDIOCAPTURE UA-5 Démarrage page 43

UA-5 application guide
Recording a guitar or bass
When you play your guitar along with audio data from your computer to record
your performance on a sequencer, only the guitar will be recorded on the computer.
fig.guitar.e
Signal flow
Guitar / Bass
INPUT
Turn on if you
Adjust the
want to monitor.
input level.
The sound of the device connected to Input jack 2 will be recorded only on the right
channel on your computer. Make settings within your application for monaural
recording, so the sound of the right channel will be recorded on a track.
Use the Input sensitivity knob to adjust the input level. For optimum recording
quality, adjust the input sensitivity knob so it is as high as you can get it without
causing the Peak indicator to light.
Turn on the Input monitor switch, and use the Input monitor volume button to
adjust the monitoring volume of your guitar or bass. If you set the Input monitor
stereo/mono select button to MONO, the guitar or bass monitoring sound will be
heard from the center.
43