Edirol AUDIOCAPTURE UA-5 Démarrage page 57

• Are you trying to play back an audio CD played by your computer's CD Player?
[Standard driver mode]
If you want to use the CD-ROM drive of your computer to play an audio CD, refer to
When playing audio CDs from the computer's internal CD-ROM drive, or using the
UA-5 to play game music (p. 33).
• Are you running multiple applications?
If multiple applications are running simultaneously, an error message may be
displayed. If this occurs, click [OK] and exit the other applications.
Even if an application window is closed, it is still running if it appears in the taskbar. Be
sure to exit unneeded applications displayed in the taskbar.
• Was the driver installed correctly?
In order for you to play back audio data via the UA-5, the driver must be installed. For
installation and settings, refer to Getting Connected and Installing Drivers
(Windows, p. 15/ Macintosh, p. 35).
• Are the faders of the Volume Control raised?
[Standard driver mode / Windows 2000 WDM driver]
Adjust the volume of each fader as described in the explanation for Settings and
checking (p. 30).
Distortion occurs in the sound from devices connected
to the input jacks
• Is the Peak indicator lit in red?
If you are inputting audio from Input jacks 3 and 4, use the UA-5 Input jack 3/4
adjustment volume to reduce the input level. If you are inputting audio from Input
jacks 1/2, use the Input sensitivity knobs to reduce the input level.
Sound from devices connected to the input jack is not
heard in the headphones
• Are the Input monitor volume button and Input sensitivity knobs set appropriately?
Turn the knobs clockwise to adjust the volume. (p. 10)
• Is the Input monitor switch turned on (lit)?
• Is the Recording source select switch set correctly?
Troubleshooting
57