Edirol AUDIOCAPTURE UA-5 Démarrage page 12

Names of things and what they do
fig.04-1
8. Input monitor stereo/mono select button
This button selects whether the input signal from the Input jacks 1 and 2, Input
jacks 3 and 4, and the Digital input connector will be monitored in stereo or in
MONO. You should also set this to MONO when you are connecting a guitar to only
Input jack 2.
Even when this is set to Mono, the audio signal sent via USB to the computer will
be stereo.
9. Input monitor volume
This adjusts the volume at which the input signal from Input jacks 1/2, Input jacks
3/4, and the Digital input connector will be output to the Headphone jack and
Master output jacks. When this is turned all the way to the right, the volume will be
the same as the volume of the recorded signal.
10. Input monitor switch
This button selects whether the input signal from the Input jacks 1 and 2, Input
jacks 3 and 4, and the Digital input connector will be sent without change from
the Headphone jack and the Master output jack. When this is on, the input signal
will be output. When this is off, the input signal will not be output. Turn this button
off (dark) if the audio data is being "thru-ed" within your computer, or if a mixer is
connected and the input signal is being output directly from the mixer for
monitoring.
* Input monitor switches can also be controlled directly from an ASIO 2.0-compatible
application such as Cubase.
11. Master volume
This adjusts the volume that is output from the Headphone jack and the Master
output jacks.
12. Headphone jack
A set of headphones can be connected here. The Headphone jack will output the
same sound as that of the Master output jacks. Sound will be output from the
Master output jacks even when headphones are connected.
13. Power indicator
This will light in red when the power is on.
If SCMS-flagged signals are being input from a Digital input connector (optical/
coaxial), this will blink.
If the ADVANCE (mode select) switch is OFF, this will blink if the sampling
frequency select switch is set to 96 kHz PLAY/96 kHz REC.
14. Power switch
Press this switch to turn the power on/off.
12
1 3
2 4
5 6 8
7 9 10
11 13
12 14