Edirol AUDIOCAPTURE UA-5 Démarrage page 24

Getting Connected and Installing Drivers (Windows)
fig.05-16e_30
11
The New Hardware
Found dialog box will
appear.
In the Copy files from
field, type the folder name
that is shown in the
SETUPINF dialog box,
and click [OK].
12
Once the driver has been installed, the New
Hardware Found dialog box will close.
In the SETUPINF dialog box, click [OK]. The SETUPINF
dialog box will close.
Next, you need to make the driver settings.
(–> Settings and checking (p. 30))
24
If the New Hardware dialog
box does not appear, re-install
the driver using the same
procedure as described in "The
'Insert Disk' dialog box does
not appear" (p. 55).