Edirol AUDIOCAPTURE UA-5 Démarrage page 22

Getting Connected and Installing Drivers (Windows)
Windows Me/98 users
Installing the driver
1
With the UA-5 disconnected, start up Windows.
Disconnect all USB cables other than those for a USB
keyboard or USB mouse.
2
Exit all currently running software (applications).
Also, close any open windows. If you are using a virus
checker or similar software, be sure to exit this as well.
3
Prepare the CD-ROM.
Insert the UA-5 Driver CD-ROM into the CD-ROM drive of
your computer.
fig.05-12e_30
4
Open the Run... dialog box.
Click the Windows Start button.
From the menu that appears, select
Run....
fig.05-13e_30
5
In the "Open" field of
the dialog box that
appears, type
"D:\Driver\Win98Me\Se
tupinf.exe" and click
[OK].
22
If the UA-5 is already
connected to your computer
and a message of "Add New
Hardware Wizard" is
displayed, go to the UA-5
Driver CD-ROM folder
namedDriver\Win98Me, open
the file Readme_e.htm, and
read the "Troubleshooting"
section entitled "You
attempted to install using the
above procedure, but were
notable to.".
In this manual, the location of
folders and files is given in
terms of the file path, using \ as
the delimiter. For example,
Win98Me\Setupinf.exe
indicates that the Setupinf.exe
file is located in the Win98Me
folder.
The drive name "D:" may be
different depending on your
system. Type the name of your
CD-ROM drive.