Care - De Dietrich DPI7884XT Manuel D'utilisation

3
•

CARE

Looking after the hob
For light soiling, use a kitchen sponge.
Use hot water to wet the area to be
cleaned and then wipe dry.
For burnt-on food deposits, sugary
spills, melted plastic, use a scouring
sponge and/or a special glass cleaning
scraper. Use hot water to wet the area to
be cleaned, use a special glass cleaning
scraper to remove the dirt, finish off with
a scouring sponge and then wipe dry.
For rings and limescale marks, apply
warm white vinegar to the dirt, leave
to work and then wipe dry using a soft
clean cloth.
For shiny metal streaks and weekly
maintenance, use a special vitroceramic
glass product. Apply
product (which contains silicon and
preferably has a protective effect) to the
vitroceramic glass.
Important note: do not use abrasive
powders or scourers. Use cleaning
creams and special gentle washing up
sponges.
Looking after the sensor
- Clean the sensor before using for the
first time
- Only use neutral products, no abrasive
products, scouring pads, solvents or
metal objects.
- Do not wash the sensor in the
dishwasher.
- The sensor's stand can be washed in
the dishwasher.
the special
22