De Dietrich DPI7884XT Manuel D'utilisation page 65

1. 3 ELECTRICAL CONNECTIONS
This hob must be connected to the
mains via an all-pole cut-off device
that complies with current installation
regulations. A disconnection device must
be incorporated into the fixed wiring.
Identify the type of cable of your hob
according to the number of wires and
colours:
- 5-wire cable (1.3.1):
a) green/yellow, b) blue, c) brown, d)
black, e) grey.
When power is first supplied to your hob,
or after an extended power cut, a light
code will appear on the control panel.
Wait approximately 30 seconds or press
any key on the control panel to make the
information disappear and use your hob
(this display is normal and is reserved
for use by After-Sales Service, where
applicable). In all cases, it should be
disregarded.
10