De Dietrich DPI7884XT Manuel D'utilisation page 60

IMPORTANT SAFETY ADVICE AND PRECAUTIONS
installation regulations. A
disconnection device must
be incorporated into the
fixed wiring.
If the power
damaged,
be replaced
manufacturer, its after-sales
service department or a
similarly qualified person,
so as to avoid danger.
Ensure that
cables of any electrical
appliances plugged in close
to the hob are not in contact
with the cooking zones.
Never use a steam cleaner
to clean your cooking hob.
The appliance
designed to be switched
on using an external timer
or separate remote control
system.
After use, turn off the hob
using its control device
and do not rely on the pan
sensor to do this.
cable is
it should
by the
the power
is not
WARNING: Only use hob
protectors
the manufacturer of the
cooking appliance or listed
as suitable in the user
guide, or included with
the appliance. The use of
unsuitable protectors could
cause accidents.
Sensor
The sensor is fitted with a
CR2032 battery (only use
the specified battery).
To insert the battery, unscrew
the cover on the back of the
sensor using a coin. Insert
the battery following the
polarity (+ upwards), then
screw the cover back on.
Replace the battery when it
is worn out or if it leaks.
The battery
removed from the appliance
before disposing of the
appliance.
5
designed by
must be