Perfect Sensor Function - De Dietrich DPI7884XT Manuel D'utilisation

2
•
USE

2.9 PERFECT SENSOR FUNCTION

There are three ways of using the
function
- View the temperature measured in the
dish directly on the hob's display.
- Programme a temperature setpoint to
be reached in the dish (Expert)
- Set the temperature thanks to the 5
cooking functions proposed.
Pairing the sensor with the hob
Pairing takes place only once when
using the sensor for the first time or when
replacing it.
The hob must be off.
1 - Press the on / off button on the back
of the sensor for 3 seconds; the sensor
gives off a blue flash and then flashes
green
2 - Hold down ;
displayed and the sensor flashes green.
3 - Give a short press on
a confirmation beep;
flashes to confirm the pairing.
sensor flashes blue (this step may take
up to 15 seconds).
the sensor is not designed to go
in an oven.
Positioning of the sensor
There are 3 recommended positions:
- Vertical
- Intermediate (adjustable)
- Slanted
is
It is not recommended to use the sensor
in its stand.
15
; the hob gives
The