Clean Lock Function; Recall Function - De Dietrich DPI7884XT Manuel D'utilisation

2
•
USE
Locking
Press and hold the key
"bloc" locking symbol appears in the
displays and a short beep confirms the
operation.
Table locked in operation
The display of cooking zones in
operation alternately indicates power
and the locking symbol .
When you press the power or timer keys
for the zones which are "on":
"bloc" appears for 2 seconds and then
switches off.
Unlocking
Press the key
symbol disappears from the display and
a beep confirms the operation.

CLEAN LOCK function

This function locks the hob off while it is
being cleaned.
To activate Clean lock:
Give a short press on the key
(padlock). A beep sounds and the "bloc"
symbol flashes in the display.
until the
until the "bloc" locking
After a predefined time, the lock will
automatically disengage. Two beeps
sound and "bloc" switches off. You can
s t o p
Lock at any moment by pressing and
holding the key

2.8 RECALL FUNCTION

This function lets you display the last
"power and timer" settings for all the
burners which were switched off less
than 3 minutes previously.
To use this function, the hob must be
unlocked. Press the On/Off key and then
give a short press on the key
When the hob is in operation (at least
one burner on), give a short press on the
key . This function reminds you of the
power and timer settings for the burner(s)
which have been switched off for less
than 30 seconds.
When the hob is switched off (all burners
off), press the On / Off button
give a short press on the button
function reminds you of the power and
timer settings for the burner(s) which
have been switched off for less than 3
minutes.
Advice on how to save energy
Cooking with the correctly sized lid
saves energy. If you use a glass lid, you
can control your cooking perfectly.
14
t h e C l e a n
.
.
, then
. The