Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
• 3
DAILY CARE OF YOUR APPLIANCE
3 . 1
-
M A I N TA I N I N G
APPLIANCE
Igniters and injectors:
If the igniters become dirty
them with a small, stiff (non-metallic)
brush (3.1.1).
The gas injectors are located in the
centre of each burner in the well shape.
Ensure that you do not block them
during cleaning, which could impair your
hob's performances.
Pan holders and gas burners:
For persistent stains, use a non-abrasive
cream, and then rinse with clean water.
Carefully wipe each part of the burner
before using your hob again.
Enamel or stainless steel :
Use a scouring cream to clean the hob's
enamel. Shine using a dry cloth.
Do not allow acid liquids such as lemon
juice, vinegar, etc. to remain on the
enamelc.
To clean the hob's stainless steel,
use a sponge and soapy water or a
commercially available stainless steel
cleaner.
Y O U R
Your hob will be easier to maintain
if done prior to use. Turn off all electrical
and gas controls.
A
clean
Preferably clean hob components
by hand rather than in the dishwasher:
• do not use scourers to clean your hob.
• Do not use steam cleaners.
• After cleaning the burner, make sure
that the lid is placed in the housing.
• The 2 reference cuts must be entered
on the 2 references made on the flame
retardant.
• The lid must be positioned steadily and
flat.
13
Publicité
Chapitres
Table des Matières
