Residual Heat Indicator; Switching Off The Device; Double Burner Hot Plate; Locking Of The Touch Keys Of The Cooking Hob - De Dietrich DPV7550B Guide D'utilisation

Table vitrocéramique
Masquer les pouces Voir aussi pour DPV7550B:
Table des Matières

Publicité

2
USE

2.5 RESIDUAL HEAT INDICATOR

The power indicator of the hot plate will
display an H when the glass surface
reaches a temperature that could cause
burning.When this risk disappears,
i) the display switches off (if the device is
in stand by),
ii) or displays 0 (if the appliance is still
running).
Warning:
In a first run, H indication may appear in
a short time on the power display. This
showing is related with setup operation
and it does not mean the cooking zone is
hot.
Warning:
H indication is used for the safety
purposes in any case. Even if the power
is cut off for a long time, after power on,
H indication appears.

2.6 SWITCHING OFF THE DEVICE

The device can be switched off at any
time by pressing the general on/off touch
key
(1). In standby mode an H will
appear in the zones that are hot. The rest
of the displays will not light up.

2.7 DOUBLE BURNER HOT PLATE

If your cooker has this option, the double
burner hot plate offers the possibility of
using the inside ring or also, in addition,
the outside one, depending on the size of
the pot or pan.
- SWITCHING ON THE DOUBLE HOT
PLATE
1 The related hot plate must be
selected.
2 Select the desired power (from 1 to 9)
using the touch key
3 Press the double hot plate touch key
(6) to activate the double burner.
When the double zone will be activated,
double zone indicator
(8) light on.
- SWITCHING OFF THE DOUBLE HOT
PLATE
1
The
key,
burnerhot
plate
previously
2 Press the double hot plate touch
key
(6) to deactivate the double
burner. The
(8) will light off and the outer ring will be
deactivated
2.8 LOCKING OF THE TOUCH KEYS
OF THE COOKING HOB
To prevent undesired manipulation you
can lock the entire unit, except for the
on/off touch key, using the locking touch
key
(7). This function is useful for
child safety. When the lock is activated,
the lock indicator light (9) comes on.
However, remember when the touch
control is on, the on/off touch key
(1)allows you to switch it off, even if
the lock is activated (the lock indicator
light (9) on).
On the other hand, if the touch control is
switched
off,
does not allow the on/off touch key
to be used.
26
or
(4/5).
by
which
its
double
was
switced
is
selected.
double burner indicator
the
locking
function
on
(1)

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Dpv7650b

Table des Matières