Flash Cooking - De Dietrich DPV7550B Guide D'utilisation

Table vitrocéramique
Masquer les pouces Voir aussi pour DPV7550B:
Table des Matières

Publicité

2
USE
To deactivate the locking function, press
the locking touch key
Lock indicator (9) light off and touch
control will be ready for use.
Child Lock
The child lock is different and more
complicated than key lock. User can
activate key lock via one sensor. But
child lock need a sensor sequence. The
Child Lock is being used to prevent
children from turning on the hob.
Activating Child Lock :
1. The hob is switched on via (1) On/Off
touch key,
2. Any zone should not be selected.
When any zone is not selected,
Increase power touch key and
decrease power touch key and minus
sensors is hold for 3 seconds at same
time. At the end of this period, a short
buzzer sound is heard
3. After buzzer signal , the
touch key is touched (there is no need to
keep press for a long time) and a long
buzzer sound is heard and the Child
Lock will be activated and all power
display shows "L".
During Child Lock, if user touch any
sensor (Main sensor included) , "L" will
flash on display.
Warning :
Child lock status is not being stored. If
the energy of the hob is butted, child lock
status could not be preserved.
Deactivating Child Lock :
To be able to deactivate Child Lock, the
Child Lock should be activated before
and all power display show "L"
1.
(7) once again.
minus sensors is hold for 3 seconds at
same time. At the end of the this period,
a short buzzer sound is heard,
2. After buzzer signal , is touched to the
need to keep press for a long time) and
a long buzzer sound is heard and the
Child Lock will be de activated and
"Indication will be light off.

2.9 FLASH COOKING

(Automatic cook start)
This function facilitates cooking as you
do not need to be present while it is
being done. The touch control pre-
(5)
programmes the chosen hot plate at the
(4)
maximum
lowers it to the desired power level
(which you have selected) after an
approximate amount of time (see table
1).
(7) locking
- SWITCHING THE AUTOMATIC COOK
START FUNCTION ON).
1 The hot plate must be selected.
2 Select power 9 and then press power
touch key (5).After using the touch key
you must lower the continuous cooking
power to the desired level, (for example
6).
27
(5) Increase power touch key and
(4) decrease power touch key and
(7) locking touch key (there is no
power
Automatic Cook Start
Selected
power
Function (in seconds)
0
0
1
60
2
180
288
3
4
390
5
510
6
150
7
210
270
8
-
9
and
subsequently

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Dpv7650b

Table des Matières