Changing Your Telephone Dialler's Batteries; Telephone Dialler Battery Low Indication - diagral TT385 Guide De Pose

CHANGING YOUR TELEPHONE DIALLER'S BATTERIES

Your telephone dialler, like all DIAGRAL devices, has an average battery life of 2 years (applicable
to the batteries supplied and normal conditions of use). The telephone dialler automatically checks
the status of its batteries and those of the control panel. It indicates that they need to be changed
about 1 month before they are completely flat. Check battery status before you go away on holiday.
Before returning any faulty devices to us, please check their battery status first.
The telephone dialler must be powered by alkaline batteries. The replacement
batteries must be identical to the type of batteries supplied with the device.
13.1

Telephone dialler battery low indication

Local indication
Remote indication:
the dialler delivers
a message
to correspondents
13.2 Changing your telephone dialler's batteries
Change the 6 batteries according to the operations described below.
Disconnect the telephone line before opening the battery flap (the telephone network
!
voltage can be hazardous).
Put your telephone dialler in test mode:
Pick up a remote control. If you do not have one, ask one of your friends or a member of your
family to stand by the keypad. Stand next to the telephone dialler, raise the aerial guide and
remove the screw cover logo using a flat-headed screwdriver. Loosen the 2 screws and hold the
dialler flat against the wall.
13
The telephone dialler alerts
your friends and family
Audible BEEP every fortnight
"DIALLER BATTERIES LOW"
"SYSTEM N°, BATTERIES LOW,
DIALLER" message
37
The telephone dialler alerts
a remote monitoring centre
voice message on receipt of an Arm order
Digital message sent to remote
monitoring centre
Battery
13